S-Weld 308L Stainless Steel Welding Electrode

Notes on Usage:

  • Keep dry. If damp, dry the electrodes at 150C for 30 minutes before use.
  • For X-ray quality level, dry at 250C for 30 minutes.
  • Clean up the contaminations to prevent the intergranular corrosion.

In Stock


S-Weld SS308L-16 is a titania type electrode, all position. The electrode contains low carbon to avert carbide precipitation during welding as well as service. Preheating and post-weld heat treatment are not necessary. It is suitable for welding of AISI 304L, and AISI 321 steel.

Additional information

Typical chemical composition of weld metal (wt%)

C : 0.028
Mn : 1.32
Si : 0.45
P : 0.012
S : 0.010
Cr : 18.42
Ni : 9.32

Typical mechanical properties of weld metal (N/mm2)

Tensile Strength : 540
Elongation (%) : 42

Welding Positions

All positions, except vertical down