Panasonic YM500KRII MIG Welding Machine

Features

Arc sensitivity is selectable by changing the tap of a reactor
Three kinds of applicable wire diameters are available
Secondary short circuit protection is the standard function
Crater voltage and crater current control are possible
Fresh tip treatment, and burn back time control are realized
Suitable for a wide range of areas and operations which greatly improves dust prevention and drip prevention
Operation panel for integrated control which is easy to see and manipulate
Thanks to Panasonic’s original technology, low-spatter and arc stability have been realized
Condidion setting is easy even for an unexperienced operator

In Stock

Additional information

Control Method	Thyristor
Phase	3
Rated Input (KVA/KW)	31.9/28.1
Frequency (Hz)	50 or 60
Output Current (A)	60-500
Crater Current (A)	60-500
Output Voltage (V)	16-45
Crater Voltage (V)	16-45
Rated Duty Cycle (%)	60
Applicable Wire Material	Solid/FCW
Wire Feeder	YW-50KB1
Applicable Wire Diameter (MM)	1.2/1.4/1.6
Cable Length (M)	1.8
Welding Torch	YT-50CS3
Rated Duty Cycle (%) Welding Torch*	CO2 : 70% MAG : 35%
Rated Current (A)	500
Wire Diameter (MM)	1.2/1.4/1.6
Cable Length (M) Welding Torch*	3